Google+

Ann Butler Unity Blog Hop – Tiled Heart Box by Candace Jedrowicz

Tile Heart Box Candace Jedrowicz 300x150

Candace Tiled Heart Box Ann Butler Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz

Ann Butler has designed a new set of stamps that she calls Faux Quilting (for their patterns) and they are way too much fun!  There are several packs of designs to choose from, so the combinations and uses are fan-zillion-tastic!  Ann set up this blog hop to show many of the ways the stamps could be used.

 


annbutler Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz



Be sure to check out all the links in this blog hop! Click icon –>  Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz

I had the pleasure of working with the Leaves All Over and Stripes.Dots.Hearts. sets.  I immediately pictured polymer clay tiles textured with Ann’s wonderful designs!  And, oh my heck, WHAT FUN!

Materials:

Ann Butler Unity stampsUnity Stamp Company Logo Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz
Polymer clay – I used black
Pasta roller
Water Spritzer
Tissue blade
Metallic paste – I used Inka Gold purple and green
Clear dimensional sealer
Aleene’s Super Thick Tacky Glue
Aleene’s Decoupage matte
Gems
Papier mache box
Decorative paper
Scissors
Paint brush

 

Anns Heart Box 1 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz .Roll out your clay on the largest setting on the pasta roller – about 1/8″.Spritz the stamp lightly before each imprint
Anns Heart Box 3 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz You can make some interesting quilty patterns before cutting your tiles.
Anns Heart Box 2 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz Use your tissue blade to cut irregular shapes and sizes.I bent the blade to make curved edges.Bake the clay according to the directions.
Anns Heart Box 4 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz After cooling, apply metallic paste with your fingers over the raised areas.Brush each tile to get rid of dried paste bits before the next step.
Anns Heart Box 6 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz Apply even coats of dimensional sealer to the tiles.I dropped gems onto the lovely dotted pattern pieces.Allow to dry over night.
Anns Heart Box 7 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz Prepare the box by decoupaging with decorative paper and metallic paste.Sand the hard edges of the paper and apply metallic paste wherever you like.
Anns Heart Box 9 e1367547710216 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz Arrange the tiles on the top of the box and glue in place.Use leftover tiles to add interest on the lower part of the box.

Anns Heart Box 10 Ann Butler Unity Blog Hop   Tiled Heart Box by Candace Jedrowicz

Ann Butler Designs & Unity Blog Hop !

You can find the Ann Butler Designs Stamps Collection on Unity Stamps Co.

1. Ann Butler
2. Beth Watson
3. Candace Jedrowicz
4. Candice Windham
5. Carol Heppner
6. Cheryl Boglioli
7. Cindi Bisson
8. Debra Quartermain
9. Denise Clason
10. Eileen Hull
11. Fabrizio (Fab) Martellucci
12. Jen Goode
13. Jonathan Fong
14. Kristin Kelly
15. Lisa Fulmer
16. Lorine Mason
17. Madeline Arendt
18. Theresa Cifali

 

Dia de los Muertos Shrine for Conan

Candace 31 Days Conan's Shrine

Conans Shrine Dia de los Muertos Shrine for Conan

Dia de los Muertos (Day of the Dead) is a wonderful holiday that celebrates the lives of loved ones who have passed.  One of the symbols of the holiday is the sugar skull, usually decorated in bright colors.   I wanted to use the sugar skull icon in a shrine for our dog that we lost early in the year, but I did not want them to be the focus.  I punched out skulls from colorful card stock and glittered them in monotones.

I started the shrine by covering  Conan’s bowls with handmade tiles, beads, baubles and all kinds of things that have meaning for our family.  It’s not a traditional mosaic process.  I glued everything on with hot glue and did not grout.

I made a polymer clay sugar skull to add as a finishing touch.  Let’s start with that tutorial and go from there.

Materials:

Polymer clay
Mark making tools – needle tool, pencil, craft knife
Glitter in several colors
Glue
Black felt pen
Card stick in several bright colors
Skull shaped punch – I used Martha Stewart’s
Glitter glue in the colors of your card stock
Silk flowers in bright colors
Hot glue

Sugar Skull 1 300x175 Dia de los Muertos Shrine for Conan I was so happy to find Martha Stewart’s Halloween glitter kit!.

The little glue bottle has a tiny nozzle – perfect for delicate work.

To make the polymer clay skull – use my shape as a guide.

Shape it on your work surface to keep the back flat.  Bake as directed.

Color in the eyes, nose and teeth with the felt pen.

Sugar Skull 2 300x291 Dia de los Muertos Shrine for Conan Add tiny dots of glue where you want one color of glitter.
Sugar Skull 3 300x243 Dia de los Muertos Shrine for Conan Sprinkle glitter.  Tap off excess glitter.  Repeat for each color.

Allow to dry.

Dia de los Muertos Border 1 268x300 Dia de los Muertos Shrine for Conan Now for the Dia de los Muertos border:

Punch out the skulls.

Outline and make designs with glitter glue the same color as the paper.

Allow to dry.

Dia de los Muertos Border 2 300x234 Dia de los Muertos Shrine for Conan Here are the mosaiced bowls in a dimensional frame.  Due to the heavyness of the bowls, I glued and screwed them on the backing.
Dia de los Muertos Border 3 300x186 Dia de los Muertos Shrine for Conan Alternate silk flowers and skulls all the way around the inside edge.

Dia de los Muertos Border 4 Dia de los Muertos Shrine for Conan


 

Glittery Pumpkin Buttons by Candace Jedrowicz

Candace 31 Days Pumpkin Buttons

Pumpkin Buttons Glittery Pumpkin Buttons by Candace Jedrowicz

Making your own buttons is a hoot!  These simple pumpkin buttons began as a piece of polymer clay that I shaped, baked and made a mold of. But, you don’t even have to make an original piece to begin with, you can make a mold of ANYTHING!  Just think of the possibilities!

Materials:

Polymer clay – Orange and scrap clay
Mold making medium
Crochet needle
Wire
Round nose pliers
Chan nose pliers
Wire Cutters
Needle tool or toothpick
Glue
Glitter

Pumpkin Buttons 1 300x192 Glittery Pumpkin Buttons by Candace Jedrowicz Make a small, flat backed pumpkin shape.Use a crochet needle to mark the sections of the pumpkin.

You can use scrap clay for this, because this will be the piece you make a mold of.

Bake according to directions.  Allow to cool.

Pumpkin Buttons 2 300x168 Glittery Pumpkin Buttons by Candace Jedrowicz You will need a mold making medium.  THis is a Sculpey product that I like.You’ll also need powder and a brush to spread it.
Pumpkin Buttons 3 300x183 Glittery Pumpkin Buttons by Candace Jedrowicz Brush and dab the powder on the original piece.
Pumpkin Buttons 4 300x239 Glittery Pumpkin Buttons by Candace Jedrowicz Push the powdered piece into a ball of mold medium.Turn it over and push a little bit to even the surface.
Pumpkin Buttons 5 300x204 Glittery Pumpkin Buttons by Candace Jedrowicz Very gently pull the mold medium away from the baked piece ever so slightly and push a tiny bit on the back side of the mold medium to release the piece.Bake the mold as directed and allow to cool.
Pumpkin Buttons 6 300x250 Glittery Pumpkin Buttons by Candace Jedrowicz To make the button and shank you’ll need orange clay, the baked mold, a water spritzer, 20 gauge wire, round nose pliers and chain nose pliers.
Pumpkin Buttons 7 300x235 Glittery Pumpkin Buttons by Candace Jedrowicz Cut a 1″ piece of wire and bend it around the round nose pliers.
Pumpkin Buttons 8 300x254 Glittery Pumpkin Buttons by Candace Jedrowicz Bend both ends out to the side with the chain nose pliers.
Pumpkin Buttons 10 300x201 Glittery Pumpkin Buttons by Candace Jedrowicz Put a bend in both ends keeping the ends level.
Pumpkin Buttons 11 300x224 Glittery Pumpkin Buttons by Candace Jedrowicz Push a small amount of clay into the mold.  You may need to adjust the amount of clay.  You don’t want it to extend beyond the edge and have it be sloppy.
Pumpkin Buttons 12 300x234 Glittery Pumpkin Buttons by Candace Jedrowicz Place the wire on the clay.Press down slightly.
Pumpkin Buttons 13 300x254 Glittery Pumpkin Buttons by Candace Jedrowicz Put a dot of clay over the wire ends.
Pumpkin Buttons 14 300x259 Glittery Pumpkin Buttons by Candace Jedrowicz Smooth the dots the best you can.Turn the mold over and gently push the back to release the clay.
Pumpkin Buttons 15 300x216 Glittery Pumpkin Buttons by Candace Jedrowicz Bake as directed and allow to cool.
Pumpkin Buttons 16 300x247 Glittery Pumpkin Buttons by Candace Jedrowicz Paint the pumpkins with glue and pour glitter on.  I held the button with pliers while I glittered.  It worked well.Pull through the wet glue in the creases for more depth.

Allow to dry.


Hot Chocolate Wall Art by Candace Jedrowicz

Candace Jedrowicz Hot Chocolate Wall Art 300x150

10 29 2012 Hot Chocolate Wall Art by Candace Jedrowicz Hot Chocolate Wall Art by Candace Jedrowicz

Hot chocolate on a chilly gray day is one of those things that brings warmth to the soul.  Candace Jedrowicz shares a bit of a warm reminder that you can make for your wall!  Featured on Cool2Craft TV.

Watch Candace’s Hot Chocolate Wall Art YouTube video tutorial!

Material:

Aleene’s Original Tacky Glue
Foam core board
Craft knife
Sand paper or nail file
Decorative paper
Brown acrylic paint
White craft foam for marshmallows
Scissors
Clear gloss sealer
Glitter glue
Hanging wire
Needle tool

Hot Chocolate Wall Art Template – click for pdf

1. Print the template and cut out the whole cup.  Trace on foam core board.

2. Use a fresh craft blade to cut out the whole cup.

3. Cut the cup rim and handle off the template, trace and cut as before.

4. Sand the edges of the foam core board until smooth.

5. Make 2 holes with needle tool on the whole cup piece – 2″ from the top.

6. On the front of the whole cup piece, wear a grove between the 2 holes for the wire to lay flat between the front and back cup pieces.

7. Feed the wire ends through the holes from front to back.  Twist the ends together on the back side.

8. Spread Tacky Glue on the back of the partial cup piece, lay on the whole cup piece and put a bit of weight on the top while drying.

9. Paint the whole piece brown and allow to dry.

10. Cut decorative paper and glue in place.  Cut a 1/4″ rim of paper to glue across the very top to represent the back rim of the cup, leaving an oval of brown paint exposed for the hot chocolate.

11. Cut bits of white craft foam for marshmallows and glue in place.

12. Dot glitter glue where you’d like it to be.

13. Add a clear gloss sealer to the “liquid” in the cup -the exposed brown paint.


Blinged Out Witch’s Hat by Candace Jedrowicz

Candace 31 Days Witch's Hat

Blinged Out Witchs Hat Blinged Out Witchs Hat by Candace Jedrowicz

What does every witch need to shine at a Witch’s Tea?  A fabulous hat! I started with a cool hat I found on line after last year’s Witch’s Tea, for a huge discount!  That was my very first Witches tea and I wore a hooded cloak, which I love, but…there was a best hat contest!  Who knew!  So, as I said, I started with one that was already cool and had a ball blinging it up!

Materials:

A  pointed hat
Hot glue
Feathers
Wire
Beads
Bangles
Knick knacks, doo dads and glitter glue

Blinged Out Witchs Hat 1 300x211 Blinged Out Witchs Hat by Candace Jedrowicz Here’s my cool hat.I love all the black gauze and and bent over point!
Blinged Out Witchs Hat 2 300x287 Blinged Out Witchs Hat by Candace Jedrowicz You may recognize many of the bling I’m adding as Halloween projects from earlier in the October.This is the first bling – a small bat pendant with a skull bead dangle.  I sewed it on to make it easy to switch out for next year’s tea.
Blinged Out Witchs Hat 3 300x168 Blinged Out Witchs Hat by Candace Jedrowicz I cut 6 3″ to 4″ strips of tulle 36″ wide and tied them in a bow.
DSC05645 300x240 Blinged Out Witchs Hat by Candace Jedrowicz I hot glued the bow on the back and added this bauble.It’s Smeared Ink’s It’s About Time Pocket Watchstamp glued on the back of a glass blob.I added glitter glue to the tulle.
Blinged Out Witchs Hat 5 300x249 Blinged Out Witchs Hat by Candace Jedrowicz I glued feathers all the way around and sewed on a pendant piece and added wires that I curled up and attached dangles to.

 

Edible Zombie Morsels by Candace Jedrowicz

Candace 31 Days Zombie Candy

Edible Zombie Morsels Edible Zombie Morsels by Candace Jedrowicz

Now will come the making of the zombie candy!  Muhuhuahahahhhh!  No baking required, but you do need clean hands, warm pockets and fruit flavored Tootsie Rolls!

Materials:

Tootsie Roll Fruit Flavors – make sure the mix includes vanilla

Candy 1 300x206 Edible Zombie Morsels by Candace Jedrowicz Tootsie Rolls take a little time and moderate strength to condition, so the first rule of Tootsie Roll Sculpting is:Put the wrapped candies in your pockets for at least half and hour before conditioning it.

Rule 2:

The Tootsie Roll will pretend it doesn’t want to stick to itself at first.  After a moment, you won’t be able to separate it!

Condition them as you would polymer clay – smooshing and rolling them in your hands until they are soft enough to shape.

Candy 2 300x239 Edible Zombie Morsels by Candace Jedrowicz For a toe, you will need 2 green, A tiny piece of white, purple and pink.
Candy 3 Edible Zombie Morsels by Candace Jedrowicz Combine the 2 green and shape into a cylinder.Flatten and widen one end.

Roll the purple and fatten it into a circle, place it on the toe and tear the end away to make a gross toenail.

Candy 5 300x234 Edible Zombie Morsels by Candace Jedrowicz Make a button shape with the white and push it in the back of the toe.Roll a tiny piece of the pink and lay it around the white.  You can put some pink under the toenail if you like.
Candy 4 300x287 Edible Zombie Morsels by Candace Jedrowicz For an eyeball, you will need 2 White, 1 pink and a tiny bit of blue.Combine the 2 white pieces and roll into a ball.
Zombie Morsels Candy Box 7 300x281 Edible Zombie Morsels by Candace Jedrowicz Twist all but a little of the pink to make the root and then roll small strings to to make veins.Mix a tiny bit of white and blue together to make a hazy looking iris.
Candy 6 300x236 Edible Zombie Morsels by Candace Jedrowicz For the teeth I used 1 white mixed with 1/2 a yellow for the piece of bone, yellow for the teeth and a bit of pink for the little bit of gums.The brain bit is a blue and white combined. Make a random lump and roll the rest into a long string to wind back and forth all over the lump.
Candy 7 300x270 Edible Zombie Morsels by Candace Jedrowicz And there you have it!  Zombie Morsels!  Oh, and the slogan is:

Zombie Morsels

When you care enough to send the very beast


Zombie Candy Box by Candace Jedrowicz

Candace 31 Days Zombie Candy Box

Zombie Candy Box Zombie Candy Box by Candace Jedrowicz

Don’t tell me you’ve never wondered what zombies taste like!  Okay, they’re gross, but what if they weren’t?  What if they tasted fruity?  Wait, I’m getting ahead of myself.  Today’s project is a zombie candy box that makes a pristine space for the universe to fill with tasty…dead things.  Wait!  Wait! Wait!  Don’t run away!  It will be fun!  I promise!

Materials:

A small box – I used a 4 piece candy box
An image for the box top – I made a digital piece with a hand drawn cemetery background, a photo of my Gravestone ATC border from Altered Art Supplies and die cut text frame
White card stock – to print your image on
Decorative Paper
Aleene’s Tacky Glue Pen
Border – I used some gold German borders
Black Glitter

Zombie Morsels Candy Box 1 300x264 Zombie Candy Box by Candace Jedrowicz For the top of the box, I created an image in Photoshop with the elements you see here.

So here’s where you begin – size the image to match the box size including a 2″ border to fold to the inside of the box.

After gluing the image to the box, fill in the tombstones with the glue pen and sprinkle with glitter.

Allow to dry.

Zombie Morsels Candy Box 2 300x243 Zombie Candy Box by Candace Jedrowicz If you will be using the box for display only, you can add any embellishments at all, but if you want to use it for an actual box, put as little paper as you can on the inside sides of the top or the outside side of the bottom so the box will open and close easily.

Measure the paper for the bottom the same as the top.

Zombie Morsels Candy Box 3 300x193 Zombie Candy Box by Candace Jedrowicz Glue the bottom to the back side of the decorative paper.

Make cuts in the paper to miter the corners.

Zombie Morsels Candy Box 4 300x178 Zombie Candy Box by Candace Jedrowicz Add glue to the flaps and fold them to the inside of the box.
Zombie Morsels Candy Box 5 300x210 Zombie Candy Box by Candace Jedrowicz Add gold trim to fancy it up a bit.  Allow the glue to dry
Zombie Morsels Candy Box 300x209 Zombie Candy Box by Candace Jedrowicz You’ll want to have chocolate cups for the inside, so go get some chocolates and eat them!

Wicked Wire Wrapping for a Pendant

Candace 31 Days Wicked Wire Wrapping #2

Wicked Wire Wrapping 2 Wicked Wire Wrapping for a Pendant

Making jewelry findings can be lots of fun and way easier than you think!  In this tutorial, I’ll show you how to make a bail for a pendant.  It can be used on anything that has a front to back hole that you want to string on a chain.

See how the pendant was made

Watch Candace’s Wire Wrapping video tutorial

Materials:

20 Gauge wire – 6″
Accent bead
Round nose pliers
Chain nose pliers
Wire Cutters

1. Measuring 1 1/2″ from one end of the wire, bend the wire around something large enough for your pendant piece.  I used a jump ring sizer, but you could use anything.  Crimp the wrapped wire just below where they meet.

2. You just made the loop to go through the hole on your pendant piece.  Slide the pendant piece on the loop.

3. Grasp the loop on the outside of the pendant piece using the round nose pliers.   Bend the short wire tail to the side and wrap it around the long wire tail.

4. Slide on and accent bead.  In the video, I didn’t wrap the short tail before adding the bead.  I chose a bead with a hole large enough to fit over both wire tails and wrapped the short tail above the bead.  Either way is fine.

5. Starting just above the bead, wrap the long tail around a pencil (or anything you have handy) twice.  At the end of the second wrap, cross the wire over to the other side of the first wrap and wrap the tail around between the double loop and the bead.

It won’t look manufactured, but I happen to like the wabi-sabi style.  Imperfect is charming to me!


Pretty Please with an Eyeball on Top!

Candace 31 Days Zipper Pull

Zipper Pull Pretty Please with an Eyeball on Top!

Today’s Halloween treat is a polymer clay cupcake zipper pull a la Smeared Ink.  The cartoony cupcake is from a collection of cool digital stamps called Candy is Dandy.  My cupcake is a nod the incredible group of artists I was blessed to hook up with recently through Smeared Ink.  The group is the Smeared and Smudged Forum and they are a hoot!

Materials:

Polymer Clay – purple, brown and orange
Colorful micro beads
Glossy sealer
Needle tool
20 Gauge wire
Accent beads
Eyeball bead
Round nose pliers
Chain nose pliers
Wire cutters
Lanyard clip

Zip 1 300x217 Pretty Please with an Eyeball on Top! You can see here the simple shapes required to make a cupcake shape.

Make a hole in the cupcake with the needle tool.

Bake according to directions.

 

Zip 2 300x278 Pretty Please with an Eyeball on Top! When the cupcake bead is cool, paint some glossy sealer on the orange icing.

Drizzle some micro beads on the icing while the sealer is still wet.

Allow to dry.

Zip 3 300x199 Pretty Please with an Eyeball on Top! I chose an orange accent bead and stacked a tiny green bead on that to make a little pumpkin dangle.

Cut a 4″ piece of wire.

Fold 1/2″ over the round nose pliers to form a loop.

Slide the dangle onto the loop.

Zip 4 300x289 Pretty Please with an Eyeball on Top! Slide the folded wire into the cupcake bead from the bottom up.
Zip 5 300x268 Pretty Please with an Eyeball on Top! Add the eyeball bead.

fold the wire over, just above the eyeball bead and make another loop.

Slide the loop on the lanyard clip.

DSC05587 copy Pretty Please with an Eyeball on Top! Wrap the wire tail around just below the loop to secure it.

Click here for detailed photos of the wire wrapping techniques described in this tutorial.


From Pin to Pendant by Candace Jedrowicz

Pin to Pendant by Candace Jedrowicz 300x150

10 22 12 Pin to Pendant Hero From Pin to Pendant by Candace Jedrowicz

Every once in a while you come across something that you’ve stashed away because you don’t use it, but you can’t let go of it. Candace Jedrowicz saved a cute little bouquet of violets pin that was her mother’s and decided to make it into a pendant. The question is – how do you do that without causing damage to the pin? Featured on Cool2Craft TV.

Watch Candace’s From Pin to Pendant video tutorial!

Materials:

Pin
Chain
Small spacer beads
Charm

1. Open the pin back and slide on enough spacer beads to almost fill the pin wire.  Close the pin back.

2. Fold chain in half and slide under the pin wire so a small loop of chain shows.  Pass the rest of the chain through the loop and, as you tighten the chain, guide it to the middle of the pin wire between the spacer beads.  This is so the chain stays in place.

3. Attach a charm to the pin wire between the two strands of chain.  This will keep the pin from falling forward.